研究統括主幹 兼 海洋環境評価系 系長
| 1. | 小島隆志,柴田俊明,宮田修,柴田清,千田哲也,”船底塗料防汚成分の基礎的な溶出挙動”,日本マリンエンジニアリング学会誌,44巻4号(2009)152-156 |
|---|---|
| 2. | Y. Yamaguchi, T. Kojima, A. Kumakura, Y. Yamada, K. Shibata and T. Senda, “Spectroscopic Study on Photolysis of Aqueous Solution of Zinc Pyrithione”, Journal of Environmental Chemistry, 19 [2] 207-213 (2009). |
| 3. | 宮田修,菅澤忍,小島隆志,柴田俊明,千田哲也,柴田清,渡邉兼人,”実船による船底塗料からの防汚物質の溶出速度測定”,日本マリンエンジニアリング学会誌,44巻2号(2009)112-117. |
| 4. | 安藤裕友,村岡英一,千田哲也,”拡散シミュレーションによるNOx規制効果の検討”, 日本マリンエンジニアリング学会誌,43巻6号(2008)106-109. |
| 5. | 高橋千織,小林佑規,千田哲也,風間明仁,下岸隆幸,”SNCM630鍛鋼材の疲労強度特性”,日本マリンエンジニアリング学会誌,42巻4号(2007.7)663-668. |
| 6. | H. Xiao, Y. Cheng, Q. Yang and T. Senda, “Mechanical and Tribological Properties of Calcia-Magnesia-Alumina-Silica-Based Glass Ceramics Prepared by in-situ Crystallization”, Materials Science and Engineering, A423 (2006) 170-174.” |
| 7. | Q. Yang, T. Senda and A. Hirose, “Sliding Wear Behavior of WC-12% Co Coatings at Elevated Temperatures”, Surface and Coatings Technology, 200, 4208-4212 (2006). |
| 8. | Y. Yamaguchi, A. Kumakura, S. Sugasawa, H. Harino, Y. Yamada, K. Shibata and T. Senda, “Direct Analysis of Zinc Pyrithione using LC-MS”, Inter. J. Environ. Anal. Chem., 86 [1-2] 83-89 (2006). |
| 9. | H. Harino, Y. Mori, Y. Yamaguchi, K. Shibata and T. Senda, “Monitoring of antifouling booster biocides in water and sediment from the port of Osaka, Japan.”, Archives of Environmental Contamination and Toxicology, 48 (2005) 303-310. |
| 10. | Q. Yang, T. Kotani, T. Senda and A. Hirose, "Sliding Wear Behavior and Tribofilm Formation of Ceramics at High Temperatures", Surface and Coatings Technology, Vol. 184, 270-277 (2004). |
| 11. | T. Senda, O. Miyata, T. Kihara and Y. Yamada, "Inspection method for identification of TBT-containing antifouling paints", Biofouling., 19, Suppl. (2003.4) 231-237. |
| 12. | Q. Yang, T. Senda and A. Ohmori, "Effect of Carbide Grain Size on Microstructure and Sliding Wear Behavior of HVOF Sprayed WC-12%Co Coatings", Wear, Vol. 254 (2003) 23-34. |
| 1. | N. Nagai, K. Namekawa, E. Yoshikawa and T. Senda, “Standardization of Marine Environmental Risk Assessment Methods for Active Substances and Anti-fouling Systems on Ships,” International Symposium on Ship Design and & Construction 2009 (2009) |
|---|---|
| 2. | H. Ando, C. Takahashi, M. Seo, M. Motozawa, Y. Kawaguchi and T. Senda, “Drag Reduction Characteristics of Polymer Solutions”, International Symposium on Ship Design and & Construction 2009 (2009). |
| 3. | N. Nagai, K. Namekawa, E. Yoshikawa and T. Senda, “Standardization of Marine Environmental Risk Assessment Method for Active Substances in Anti-fouling Systems”, 14th International Congress on Marine Corrosion and Fouling, p.93 (2008). |
| 4. | K. Shibata, E. Yoshikawa, M. Honma, T. Nishi, T. Senda and R. Kojima, “Kinetic Model for the Leaching of Antifouling Substance from Self Polishing Paints”, 14th International Congress on Marine Corrosion and Fouling, p.34 (2008). |
| 5. | Y. Yamaguchi, S. Sugasawa, H. Harino, K. Shibata and T. Senda, “Analysis of Zinc Pyrithione and its Degradation Compounds Resulted from Photolysis and Hydrolysis Process”, 14th International Congress on Marine Corrosion and Fouling, p.32 (2008). |
| 6. | H.Harino, Y, Yamaguchi, K. Shibata and T. Senda, “Simultaneous Determination of Alternative Compounds in Environmental Samples”, 14th International Congress on Marine Corrosion and Fouling, p.31 (2008). |
| 7. | K. Shibata, T. Senda, T. Shibata, Y. Yamaguchi, S. Sugasawa, R. Kojima, O. Miyata, M. Akiyama, Y. Muramatsu, “Development of PEC Model for Antifouling Agent and Uncertainty in the Prediceted Concentration” 14th International Congress on Marine Corrosion and Fouling, p.7 (2008). |
| 8. | E. Yoshikawa, N. Nagai, K. Namekawa, K. Shibata and T. Senda, “Research for the Risk Assessment of Anti-Fouling System”, Paper of International Symposium on Shipbuilding Technology (ISST 2007) ? Fabrication and Coatings -, pp. 107-115 (2007). |
| 9. | K. Shibata, S. Sugasawa, Y. Yamaguchi, V. A. Sakkas, F. Kitamura and T. Senda, “Space and Time Distribution of Antifouling Agent in Aquatic Environment”, Paper of International Symposium on Shipbuilding Technology (ISST 2007) ? Fabrication and Coatings -, pp. 93-98 (2007). |
| 10. | R. Kojima, O. Miyata, T. Shibata, T. Senda and K. Shibata, “Leaching Phenomena of Antifouling Agent from Ships’ Hull Paint”, Paper of International Symposium on Shipbuilding Technology (ISST 2007) ? Fabrication and Coatings -, pp. 85-91 (2007). |
| 11. | Y. Kawagoe, T. Senda, K. Murakami, C. Takahashi and K. Adachi, “Microscopic Observations of Sliding Wear Surface of Alumina by TEM”, pp. 761-766 in Mechanical Proeperties and Performacne of Engineering Ceramics and Composites II, John Wiley, 2007. |
| 12. | T. Senda, Y. Kawagoe, N. Kotani, K. Murakami and K. Adachi, “Microscopic Study of Sliding Wear Surfaces of Alumina”, Key Engineering Materials, 317-318 (2006) 347-350. |
| 13. | Y. Yamaguchi, A. Kumakura, S. Sugasawa, H. Harino, Y. Yamada, K. Shibata and T. Senda, “Direct Analysis for Zinc Pyrithione Using LC-MS”, Third European Conference on Pesticide, (2004.10). |
| 14. | Y. Yamaguchi, A. Kumakura, M. Ishigami, Y. Yamada, K. Shibata, T. Senda, "Photodegradation of Zinc and Copper Pyrithiones in Aqueous Environments", 12th Congress on Marine Corrosion and Biofouling (2004). |
| 15. | Y. Yamaguchi, A. Kumakura, M. Isigami, K. Shibata, T. Senda and Y. Yamada, "Photospectrometric study on degradation of Zinc and Copper pyrithiones" Proc. Internatioanl Symposium on Antifouling Paint and Marine Environment, Edited by K. Shibata and T. Senda (2004.1) 228-233. |
| 16. | K. Shibata, O. Miyata, T. Senda, T. Kihara and Y. Yamada, “Sampling and Analyzing Method og Tributyltin in Antifouling Paints on Ships”, Proc. Internatioanl Symposium on Antifouling Paint and Marine Environment, Edited by K. Shibata and T. Senda (2004.1) 24-31 |
E-mail : senda★nmri.go.jp
※「★」記号を「@」に置き換えて下さい。