top bar
Chapter 4. How to Use a Milling Machine

Machining Large Workpieces

Clamping Kit

In the case of the milling processes, a small sized material is set to a vise on the table. a large sized material, which cannot be set to the vise, is set to the table with a clampling kit as shown in Figure 1. Figures 2 - 5 show the examples of the processes.

Fig.1, Clamping Kit

Fig.2, Setting of a Long Column

Fig.3, Drilling on a Long Column

Fig.4, Setting of a Large Board

Fig.5, Setting of a Large Wood Board

[ Metal Working TOP ] [ Hirata HOME ] [ Power and Energy Engineering Division ] [ NMRI HOME ]
bottom bar